2108 Analog Output Module. Connects to 4-20 mA output to external non-Isco equipment. Requires a computer running Flowlink software (v4.15 or higher) to configure the 2108 module. Includes small DIN rail removable connector and instruction_1156364
Representative image only

2108 Analog Output Module. Connects to 4-20 mA output to external non-Isco equipment. Requires a computer running Flowlink software (v4.15 or higher) to configure the 2108 module. Includes small DIN rail removable connector and instruction

$5,601.20

The price is inclusive of GST
Accuracy: Integral Nonlinearity±0.012% max
Case MaterialABS
Enclosure RatingNEMA 1, IP20
Individual Channel Specifications: IsolationOutput galvanically isolated from DC power, from the network, and the other outputs
Individual Channel Specifications: Maximum load resistance600 ohms
Individual Channel Specifications: Output range4 - 20mA
Number of Analog Output Channels3
Offset ±0.05% max (0mA or 4mA)(Ta = 25°C): Offset Drift50 ppm/°C max
Offset ±0.05% max (0mA or 4mA)(Ta = 25°C): Power7.0 to 26.0V DC, 300 mA typical at 12V DC, 280 mA standby
Offset ±0.05% max (0mA or 4mA)(Ta = 25°C): PSRR10 µA/V max
Offset ±0.05% max (0mA or 4mA)(Ta = 25°C): Resolution16 bits, 244 nA, 0.0015% of 16mA span
Offset ±0.05% max (0mA or 4mA)(Ta = 25°C): Total Output Error±0.15% max (20mA or 24mA)(Ta = 25°C)
Offset ±0.05% max (0mA or 4mA)(Ta = 25°C): Total Output Error Drift50 ppm/°C max
Size (HxWxD)4.76 x 6.73 x 2.17 in (12.1 x 17.1 x 5.5 cm)
Weight1.3 pounds (0.6 Kg)
2100 Series Flow Modules Brochure
2108 Analog Output Module Datasheet
2108 Analog Output Module User Manual
Overview

2100 Series Flow Modules

Teledyne Isco’s 2100 Series offers flexible, modular design and easy configuration for a wide range of networked open-channel flow monitoring applications, including Inflow and Infiltration studies, CMOM and AMP data collection, and river monitoring.

Compact, stackable, NEMA 4x, 6P (IP68) modules snap together to provide the capabilities needed for practically any site and monitoring requirement.

2108 Analog Output Module

Easy interfacing from 2100 Series to SCADA/DCS

 

The 2108 Output Module provides three independent current outputs for Isco 2100 Series Area Velocity Flow modules; the 2150, 2151, and 2151P. The 2108 is DIN Rail mounted and uses a 7-26V DC power supply.

It provides an easy interface from Isco’s advanced 2100 Series Area Velocity Modules to data collection systems like SCADA/DCS or any other secondary instrument systems.

Standard Features

  • Three independent, isolated outputs per module. 
  • Outputs are freely programmable for any parameter measured by Isco’s Area Velocity flow module. 
  • When more than one module is stacked, each output can be configured for any parameter for any module connected to the 2108. 
  • The 2108 Module can be mounted as far as 3,000 ft from other modules (an Isco Quick Disconnect is recommended to simplify the installation). 
  • Isco Flowlink 4.15 can interrogate any 2100 Series module through the 2108, eliminating the need for confined space entry.

Applications

  • Interfacing 2100 Series (2150 or 2151 flow modules) to SCADA systems and other analog data applications

Options and Accessories

  • DIN rail mount DC power supply. Input 115-230 VAC 50/60 Hz, Output 12 VDC, 1.5A. 
  • 2100 Series Connect Cable, 50 ft. (15 m). One cable end has a single connector to plug into bottom of 2100 Module. Opposite end is unterminated with six wires stripped for connection to 2108 Analog Output module, Quick Disconnect box, or other device.

Over 40,000 Customers Trust John Morris