FLOWMETER MASS 5 SL/MIN_1148237
Representative image only

FLOWMETER MASS 5 SL/MIN

$1,789.70

The price is inclusive of GST
Accuracy±1.5% full-scale
CertifiedYes
DescriptionAluminum gas mass flow transmitter, 5 sL/min
Gas typeAir
Leak Integrity1 X 10-7 sccs He (max)
Material FittingBrass
Material HousingAnodized Aluminum
Material O-RingViton
Max flow rate (LPM)5
Max Operating Temperature (DegreeC)50
Max Operating Temperature (DegreeF)122
Max Particulate Size (microns)5
Max pressure (psi)1000
Media TypeArgon, Oxygen, Helium, Air;Nitrogen, Nitrogen, Acetylene;Air;Argon;Carbon Dioxide;Carbon Monoxide;Helium;Hydrogen;Nitrogen;Oxygen, Air, Water, Hydrogen
Min flow rate (LPM)0
Min Flow Rate (mLmin)0
Min Operating Temperature (DegreeC)0
Min Operating Temperature (DegreeF)32
OutputLinear 0 to 5 VDC (1000 Ω minimum load), 4 to 20 mA (50 to 250 Ω loop resistance)
Output (mA)Yes
Output (Voltage)Yes
Process connection1/4" Compression
Repeatability±0.5% full-scale
Response Time (msec)2000
Wetted MaterialsAnodized aluminum, brass, and Viton®
Overview
  • Nonclogging straight sensor tube provides high accuracy
  • All models include a calibration certificate to NIST-traceable standards

Flow transmitters combine a restrictor flow element with an advanced straight sensor tube to provide high accuracy and repeatability. Gas flow rates are unaffected by temperature and pressure variants within limitations.
Select from aluminum or 316 stainless steel (SS) models. Wetted materials are anodized aluminum, brass, and Viton® for aluminum models; SS and Viton for SS models.
These precalibrated flow transmitters operate at inlet pressures between 5 and 60 psi and at gas temperatures between 59 and 77°F (15 to 25°C) while maintaining the stated percentage of full scale accuracy and linearity. When operating beyond 5 to 60 psi, add 0.01%/psi full scale; if operating beyond 59 to 77°F (15 to 25°C), add ±0.15%/°C full scale.

Over 40,000 Customers Trust John Morris