PMP SLND 30UL 12VDC PPS EPDM_1171940
Representative image only

PMP SLND 30UL 12VDC PPS EPDM

$1,864.50

The price is inclusive of GST
DescriptionSelf-Priming Micro Pump; 30 uL, PPS/EPDM, 12 VDC
Height (cm)2.54
Height (InchShort)1
Inlet connection1/4"-28 UNF(F)
Length (cm)6.35
Length (InchShort)2.5
Max Flow Rate (mLmin)3.6
Max Temperature (DegreeC)70
Max Temperature (DegreeF)158
Outlet connection1/4"-28 UNF(F)
Power (VDC)12
Power Pigtail ConnectionYes
Run dryYes
Self-primingYes
Suction Lift Wet (inH2O)48
Suction Lift Wet (inHg)3.5
Suction Lift Wet (mmHg)671
Suction Lift Wet (mmofH2O)1200
Wetted MaterialsPPS, EPDM
Width (cm)3.65
Width (InchShort)1.4375
Literature
View Virtual Catalog - English - gy44-0785.pdf
Overview
  • Accurate volumetric dispensing of 4 microliters to 250 microliters
  • Positive shut with pressures less than 3 psi (except 73120-66 and -68 which has a 1 psi shut-off)
  • High cycle life - up to 20 million dispense cycles
  • Low power consumption

The Cole-Parmer pumps are factory set for discrete outputs ranging from 4ìl to 250ìl. The pumps can be cycled at up to 2.0 Hz for the 73120-0*, -1* and -2* series of pumps. The 73120-3*, -4*, -5* and -6* series can be cycled up to 1.6 Hz. Based upon the pump and cycle rate, flow rates can reach up to 25 mL/min. All the while the pump can maintain a high level of accuracy with a deviation from set-point being less than 1%.

The pumps are self-priming. Intially, the suction created by the larger pumps is sufficient to pull liquids from an unpressurized container located up to four feet below the. Once primed, the pump is able to maintain around 5 psi pressure.

Long life (3,000 hours) is built into each pump with a guarantee for up to 20 million actuations.

Over 40,000 Customers Trust John Morris