Cole-Parmer, Venturi Vacuum Pump, 1.2 cfm, 29.5"Hg_1195301
Representative image only

Cole-Parmer, Venturi Vacuum Pump, 1.2 cfm, 29.5"Hg

$1,080.20

The price is inclusive of GST
Air Input At 80 Psi (CFM)4.8
Air Input At 80 Psi (LPM)139
DescriptionVenturi Vacuum Pump, 1.2 cfm, 29.5"Hg
Free-Air Capacity (CFM)1.2
Free-Air Capacity (LPH)2040
Free-Air Capacity (LPM)34
Height (cm)5.4
Height (InchShort)2.125
Height (mm)54
Length (cm)13.34
Length (InchShort)5.25
Length (mm)133.4
Max flow rate (cfm)1.19
Max Flow Rate (LitersPermin)34
Max Temperature (DegreeC)60
Max Temperature (DegreeF)140
Max Vacuum (inHg)29.5
Max Vacuum (mbar)14.2
Max Vacuum (mmHg)10.7
Max Vacuum (torr)10.7
Port sizeair supply: 1/4" NPT(F), vacuum: 1/4" NPT(F)
Wetted partsAluminum, Brass, Buna N
Width (cm)1.91
Width (InchShort)0.75
Width (mm)19.1
View Virtual Catalog - English - gy44-1035.pdf
Overview
  • No moving parts ensures long life with low maintenance.
  • Venturi pumps are air-powered—require no electrical power source or lubricant.
  • Place these compact vacuum pumps close to application for fast response and minimal vacuum loss.

These new pumps take advantage of the venturi effect—as a stream of compressed air exits a constricted orifice the resulting pressure drop draws air through a vacuum port. Since they require no oil or electricity, the resulting vacuum (up to 29.5" Hg) is clean and efficient. With no moving parts or electrical hazards, these air-powered pumps are also intrinsically safe. The remarkably compact size of these pumps enables you to design vacuum systems with smaller, less expensive components and reduced maintenance costs. Each model (except 79165-40) includes a replaceable silencer that reduces noise levels up to 30% while offering minimal resistance to air flow.
Select the model of vacuum pump best suited to your specific application. Model 78165-20 includes a vacuum gauge which provides easy visual monitoring—helpful when troubleshooting. We recommend an air filter upstream of the pump to prolong service life. Filter should have a pore size of 50 µm or smaller.

Over 40,000 Customers Trust John Morris