Traceable High-Accuracy RTD General Purpose Digital Thermometer with Calibration; 1 Wire Probe_1147288
Representative image only

Traceable High-Accuracy RTD General Purpose Digital Thermometer with Calibration; 1 Wire Probe

$425.70

The price is inclusive of GST
Accuracy±0.3°
AlarmYes
BatteryAA Battery (1)
Cable Length (InchShort)60
DescriptionTraceable® High-Accuracy RTD Digital Thermometer with Calibration; Bullet Probe
Height (InchShort)4.25
Max Temperature (DegreeC)70
Max Temperature (DegreeF)158
Meter Measurement TypeDigital Indicator
Min Temperature (DegreeC)-100
Min Temperature (DegreeF)-58
Min/Max FunctionYes
No. of Probe(s) Included1
Number Of Probe Channels1
Probe Diameter (InchShort)0.13
Probe length (InchShort)9
Resolution0.01°
Stem Length (InchShort)6.25
Instruction Manual
View Virtual Catalog - English - gy44-0934.pdf
Overview
  • Monitor minimum and maximum temperatures— all at a single glance!
  • Get accurate, reliable measurements with included NIST-traceable calibration
  • Temperature-buffered platinum RTD probe
  • RTD probe insures linear response and high accuracy across the entire range
  • Triple-display—shows high, low, and current temperature simultaneously

Easily monitor temperature in liquids, baths, air/gas, incubators, refrigerators, or freezers. Keep track of temperature conditions overnight or for any time period—minimum and maximum temperatures are stored until the memory is cleared. The 4-wire platinum probe insures linear response and high accuracy across the entire range.

The built-in alarm provides an alert when temperature rises above or falls below a user defined set point, and is programmable in 1° increments. A visual and audible signal continues even if the temperature returns to non-alarm range until reset by the user.

Probe is attached to a 10-ft (3 m) micro-cable that permits a doors to close on it; probe and cable are both submersible. Mount meter with included Velcro® strips, wall-mount slots, or use flip-open stand on benchtop.

Traceable® products are calibrated to NIST-traceable standards and ready to use as soon as you receive it. Each product goes through an intense vetting process before it can carry the Traceable name, and it includes NIST-traceable certification. This means that a 17025-accredited calibration test lab has confirmed that the product meets or exceeds all stated specifications, saving you both time and money by not having to calibrate separately.
NIST-traceable calibration also helps you meet quality standards and regulatory compliance for ISO, FDA, cGMP, VFC, CAP, CLIA and Joint Commission requirements. Model 37804-05 has a wire probes with staunless steel bullet sytle end and is designed for general-purpose applications.

Whats Included:

NIST-traceable calibration certificate with data, plastic stand, double back tape and Velcro® for attaching holder to any surface, stainless-steel probe(s), and two AA batteries

Over 40,000 Customers Trust John Morris