- Shore A, 0 and D to measure the hardness of plastics through penetration measurement
- Shore A rubber, elastomers, neoprene, silicone, vinyl, soft plastics, felt, leather and similar material
- Shore 0 foam, sponge
- Shore D plastics, formica, epoxides, plexiglass etc.
- Internal memory for up to 500 values
- Delivered in a hard carrying case
- Particularly recommended for internal comparison measurement. Standard calibrations e. g. to DIN 53505 are often not possible because of very narrow standard tolerances|Can be attached to the test stands TI-A0 (for Shore A and A0), TI-D. (for Shore D) to improve measuring uncertainty
- Large display with backlight
- Selectable: AUTO-OFF function or continuous operation, charge indicator|
Representative image only
Professional Shore Hardness Tester, Measuring Range 100 HA
$1,013.10
Dimensions packaging (WxDxH)250 mm x 210 mm x 53 mm
Environment max. temperature50 °C
Environment min. temperature0 °C
Gross Weight820 g
Net Weight173 g
Weighing unitsShore A
Overview
- Shore A, 0 and D to measure the hardness of plastics through penetration measurement
- Shore A rubber, elastomers, neoprene, silicone, vinyl, soft plastics, felt, leather and similar material
- Shore 0 foam, sponge
- Shore D plastics, formica, epoxides, plexiglass etc.
- Internal memory for up to 500 values
- Delivered in a hard carrying case
- Particularly recommended for internal comparison measurement. Standard calibrations e. g. to DIN 53505 are often not possible because of very narrow standard tolerances|Can be attached to the test stands TI-A0 (for Shore A and A0), TI-D. (for Shore D) to improve measuring uncertainty
- Large display with backlight
- Selectable: AUTO-OFF function or continuous operation, charge indicator|