RO FILTER CTRG 1 MICRON 20 IN_1139022
Representative image only

RO FILTER CTRG 1 MICRON 20 IN

$70.40

The price is inclusive of GST
DescriptionGE Depth Cartridge Filter, 1.0 micron, plain end, 20" length
Filter Length (InchShort)20
Filter mediaPolypropylene
Flow Rate6.4 GPM at 1.0 psid
Max Temperature (DegreeC)71
Max Temperature (DegreeF)160
Micron rating1
Overview
  • 100% greater dirt-holding capacity lowers total cost of filter operations
  • Up to twice the life of conventional depth filters
  • Up to 50% lower pressure drop

Z.Plex® filters are made from thermally bonded fibers of polypropylene. GE Water & Process Technologies certifies that it uses no resin binders, lubricants, antistatic or release agents, or other additives in the manufacture of these cartridges. Suitable to 160°F (71°C).

ROSave.Z® filters

For use in reverse osmosis pretreatment and other pure water applications. Available in 1 and 5 micron pore sizes. The resin used for manufacturing the filter media meets the food contact requirement of the U.S., and is FDA compliant.

Applications
• Bottled water
• Beverage
• Electronics

WellPro.Z® filters

For use in well injection, produced water disposal and other oil and gas applications. Available in 1, 5, 10 and 20 micron pore sizes.

Applications
• Well injection
• Produced water filtration
• Water flood / enhanced oil recovery
• Brine filtration
• Sea water filtration

Over 40,000 Customers Trust John Morris