FLOW SENSOR F/0.5-4"PIPE PP_1086301
Representative image only

FLOW SENSOR F/0.5-4"PIPE PP

$2,169.20

The price is inclusive of GST
DescriptionRotor-X High Flow Sensor for 1/2 to 4" Pipe, PP Body, Titanium Shaft
Max Operating Temperature (DegreeC)85
Max Operating Temperature (DegreeF)185
OutputOpen collector, sinking
Pipe size1/2 to 4"
Power5 to 24 VDC
Repeatability±0.5% full-scale
Wetted MaterialsPolypropylene, Titanium
Instruction Manual
View Virtual Catalog - English - gy44-0384.pdf
Overview
  • Open-core design ensures accurate, linear output to ±1%

Sensors contain an open-core rotor with a small magnet in each of the four blades. As they rotate, the magnets pass a coil in the sensor. The transducer generates a linear frequency output that is proportional to the flow velocity. This signal travels up to 200 feet without amplification.

Open-core design eliminates cavitation at flow velocities from 1 to 20 ft/second. Closed or solid paddle-wheel designs create air bubbles at these velocities, causing a nonlinear, nonrepeatable signal.

Sensor materials resist most chemicals. All models have PVDF rotor and VITON® O-ring; and include a 25-ft connecting cable.

ROTOR-X flow sensors are compatible with all of our line-, battery-, and sensor-powered flowmeters, accumulators, and controllers. Mount in any type of pipe using an installation fitting—order separately.

Whats Included:

25-ft connecting cable

Over 40,000 Customers Trust John Morris