PMP MTRNG RC.03-20 ML/MIN PTFE_1181055
Representative image only

PMP MTRNG RC.03-20 ML/MIN PTFE

DescriptionDigital Control Dosing Metering Pump, PTFE head, 0.03 to 20 mL/min
Height (cm)19.1
Height (InchShort)7.5
Inlet connection5/16" hose barb
Length (cm)15.9
Length (InchShort)6.25
Max flow rate (GPH)0.343
Max Flow Rate (mLmin)1300
Max Flow Rate (StrokesPermin)175
Max pressure (bar)90
Max pressure (psi)6.2
Max Temperature (DegreeC)80
Max Temperature (DegreeF)176
Min flow rate (GPH)0.05
Min Flow Rate (mLmin)200
Min Flow Rate (StrokesPermin)0.175
Outlet connection5/16" hose barb
Power (Amps)0.54
Power (Hz)50/60
Power (VAC)100 to 230
Power cord6-ft power cord with 3-prong U.S. plug
Run dryYes
Suction Lift, Wet (inH2O)156
Suction Lift, Wet (mmofH2O)3962
Wetted MaterialsFFPM, polypropylene, PTFE
Width (cm)10.8
Width (InchShort)4.25
View Virtual Catalog - English - gy44-0788.pdf
Overview
  • Uniformity of discharge ensures low-pulsation transfer process
  • Quiet, reliable, accurate, and virtually maintenance-free
  • Pumps can run dry continuously without damage
  • Versatile pumps handle flow rates up to 100 mL/min and volumes up to 1000 mL

Simple and intuitive function makes the liquid dosing pump an accurate and reliable solution for your laboratory dosing applications. User-friendly design provides a quiet, dry-running, and self-priming dosing operation. Easy calibration and cycle mode allow for uninterrupted and virtually maintenance-free dosing.
This pump features a PTFE-covered diaphragm and IP65-rated splash protection, making it resistant to chemical attack and adaptable to fluid characteristics.
Unique drive system ensures maximum uniformity of discharge resulting in a low-pulsation transfer process. Pumps feature either local or external control capabilities including start/stop and reset/prime via TTL contact as well as output signal fault alarm. Models available with a RS-232 port for connectivity.


A convenient way to transfer liquids in the laboratory. Compact and resistant to chemical attack, they prevent contamination of your pumped medium. Larger pump head geometry and wetted materials provide the longest possible lifetime when pumping corrosive liquids, gases and vapors. Pumps can have either local or external contact capabilities—external protocols include: 0 to 10 VDC, start/via TTL contact, and output fault alarm.

Whats Included:

5-ft (1.5-m) power cord and two 3-ft (1-m) pieces of FEP inlet/outlet tubing (1/8" OD x 1/16" ID) with UNF 1/4"-28 fittings. Models with RS-232 port also include a cable with D-Sub-9 connector.

Over 40,000 Customers Trust John Morris