Tungsten Halogen Light source- LS/PS included_1629499
Representative image only

Tungsten Halogen Light source- LS/PS included

Overview

LS2 High Intensity White Light Source

  • High intensity 100W tungsten halogen light source (50W option available)
  • Max. intensity up to 1800 µmol m-2 s-1 in DW1, DW1/AD & LD1/2 electrode chambers
  • Max. intensity up to 8000 µmol m-2 s-1 in DW2/2, DW3 & LD2/3 electrode chambers using LS2/FO and A8 accessories
  • Integral optics provide minimum intensity variation across beam and little divergence from parallel
  • Integral infrared reducing Hot-Mirror filter
  • Mains powered stabilised power supply
  • Mounting slots allowing addition of filters for intensity attenuation or spectral modification

 

 

The LS2 light source is a high intensity (100W) tungsten halogen light source which is powered from a stabilised power supply.

The lamp housing contains a cooling fan, infrared reducing “Hot-Mirror” and optics to provide light with minimum variation of intensity across the beam and little divergence from parallel. 2 slots are provided to accept 50mm square optical filters or a manual shutter plate.

A range of light intensity steps may be achieved by adding permutations of the 4 A5 neutral density filters supplied (0.1,0.3,0.6 and 1.0 O.D.) to attenuate the light intensity. Maximum sample illumination intensities vary depending on the type of electrode chamber in use.

The table below shows the maximum achievable sample illumination intensities for each electrode chamber.

Electrode Chamber Maximum Intensity
DW1 1800 µmols m-2 s-1 with LS2 mounted horizontally to chamber.
DW1/AD 1800 µmols m-2 s-1 with LS2 mounted horizontally to chamber.
DW2/2 8000 µmols m-2 s-1 with LS2/FO and A8 accessories to interface with DW2/2 optical port.
DW3 1800 µmols m-2 s-1 with LS2 mounted on to locating ring of larger optical window.8000 µmols m-2 s-1 with LS2/FO and A8 accessories and 16mm dia. reducing adapter (supplied with DW3) inserted into smaller optical port.
LD1/2 1800 µmols m-2 s-1 with LS2 mounted vertically on to optical window of the chamber.
LD2/3 1800 µmols m-2 s-1 with LS2 mounted vertically on to optical window of the chamber.8000 µmols m-2 s-1 with LS2/FO and A8 accessories inserted into 16mm dia. optical port.

Over 40,000 Customers Trust John Morris