Masterflex I/P® Digital Modular Drive with Easy-Load® Pump Head for Precision Tubing; 115/230 VAC_1195260
Representative image only

Masterflex I/P® Digital Modular Drive with Easy-Load® Pump Head for Precision Tubing; 115/230 VAC

Control typeVariable-Speed Digital
DescriptionI/P Precision Modular Pump w/ Easy-Load Head; 650 rpm
Drive07591-20 (I/P® Variable-Speed Wash-Down Modular Drive)
Drive IP ratingIP 33
Height (cm)15.57
Height (InchShort)6.13
Housing MaterialABS Plastic and Aluminum Controller; Painted Steel Drive
Length (cm)35.3
Length (InchShort)13.88
Max Flow Rate Per Channel (LPM)8
Max Flow Rate Per Channel (mLmin)8000
Max rpm650
Min Flow Rate Per Channel (LPM)0.06
Min Flow Rate Per Channel (mLmin)60
Min RPM6
Number of Channels1
Number of Rollers3
Open-Head SensorNo
Power (Amps)4.4A at 115v; 2.2A at 230v
Power (Hz)50/60
Power (VAC)90 to 260
Pump head77602-10 (I/P® Easy-Load Pump Head)
Pump SeriesI/P
Remote Inputs4 to 20 mA, 0 to 10 V, start/stop and direction via contact closure
Tubing06434-73, 10-ft (C-FLEX® Ultra, I/P® 73)
Tubing sizes acceptedI/P® 26, 73, 82
Washdown capableNo
Width (cm)13.97
Width (InchShort)5.5
View Virtual Catalog - English - gy44-0735.pdf
Overview
  • Modular drive lets you place motor and controller where convenient—ideal for limited or awkward spaces
  • Minimum flow rate is 0.06 LPM (0.02 GPM); maximum flow rate is 8 LPM (2.1 GPM)
  • Three-digit LED display shows motor rpm—confirm speed setting at a glance
  • Membrane keypad for easy up-front control of speed, direction, and start/stop
  • Reversible motor—purge tubing before or after pumping; pump fluid in either direction
  • LED indicators confirm motor direction
  • Powerful motors let you stack two pump heads for increased flow rates and for multichannel applications
  • Separate speed and power (on/off) control—maintain speed setting while turning pump on/off
  • ±0.25% speed control; meter and transfer fluids with accuracy and repeatability
  • Remote control capabilities via DB9 female connector on back of drive: Speed control input 4 to 20 mA or 0 to 10 V; Pump direction (CW/CCW) via open collector or contact closure; Start/stop via open collector or contact closure
  • Splash-resistant ABS plastic controller housing is IP33 rated; drive housing is epoxy finished steel, IP33 rated
  • 6-ft (1.8-m) cable connects drive and controller; order optional extension cable 07557-51 to extend to 15 ft (4.6 m)

I/P® modular drives feature reversible pumping and allow you the flexibility to separate the motor from the controller. These accurate modular drives have powerful motors, speed display, and ±0.25% speed control for precise flow regulation—ideal for metering and critical transfer applications.

Whats Included:

6-ft (1.8-m) line cord with IEC 320/CEE22 socket. These models are shipped with country-specific plug/cord set; please specify ultimate destination when ordering.

Over 40,000 Customers Trust John Morris