Masterflex L/S Digital Pump with Open-Head Sensor and Easy-Load II Pump Head (thick wall), 600 rpm_1213813
Representative image only

Masterflex L/S Digital Pump with Open-Head Sensor and Easy-Load II Pump Head (thick wall), 600 rpm

Control typeVariable-Speed Digital
DescriptionDigital Pump with Open-Head Sensor and Easy-Load II Pump Head (thick wall), 600 rpm
Drive07522-28 (L/S® Standard Digital Drive)
Max Flow Rate (mLmin)1700
Max Flow Rate Per Channel (mLmin)1700
Max rpm600
Min Flow Rate (mLmin)0.28
Min Flow Rate Per Channel (mLmin)0.28
Min RPM0.1
Number of Channels1
Power (Amps)2.2 / 1.1
Power (Hz)50/60
Power (VAC)90 to 260
Pump head77200-32 (L/S® Easy-Load II pump head with Open-Head Sensor
Pump SeriesL/S
Tubing06434-24, 10 ft (C-FLEX ULTRA®, L/S® 24 )
Overview
  • Precision digital drives offer a maintenance-free high-accuracy motor and graphical interface that makes setup and operation easier than ever
  • Graphical LCD shows four operating modes continuous run, timed dispense, copy dispense, volume dispense. View pump performance continually.
  • Menu-driven interface lets you select one of seven languages for programming and operation
  • Dispense by mL—volume in mL of each dispense, 0.001 to 9999 mL; Copy—1 to 9,999 dispense cycles; or Time—time interval of on/off cycles (1 sec to 99 hr, 59 min, 59 sec per cycle)
  • Brushless, maintenance-free motor offers ±0.1% speed control accuracy with a 6000 to 1 turndown ratio
  • Remote control via DB25 female connector on drive:
  • --Speed control input 0 to 20 mA, 4 to 20 mA, or 0 to 10 V;
  • --Pumping direction requires open collector or contact closure;
  • --Start/stop/purge requires open collector or contact closure;
  • --Tachometer output 0 to 20 mA, 4 to 20 mA, or 0 to 10 V, open collector

Whats Included:

pump head, tubing, and 6-ft (1.8-m) line cord with IEC 320/CEE22 socket. These models are shipped with country specific plug/cord set; please specify ultimate destination when ordering.

Over 40,000 Customers Trust John Morris