FLOW SENSOR 400-2000ML/MIN_1137928
Representative image only

FLOW SENSOR 400-2000ML/MIN

$1,460.80

The price is inclusive of GST
Accuracy±3% full-scale
DescriptionEconomical Ryton PPS Flow Rate Sensor for Gases, 0.4 to 2 LPM (Air)
Gas typeAir
Max Operating Temperature (DegreeC)55
Max Operating Temperature (DegreeF)131
Media TypeHydrogen, Acetylene;Air;Argon;Carbon Dioxide;Carbon Monoxide;Helium;Hydrogen;Nitrogen;Oxygen, Helium, Nitrogen, Oxygen, Air, Argon, Water, Air;Nitrogen
Output0 to 5 VDC
Output (Voltage)Yes
Pressure drop at maximum flow (PSID)10
Repeatability±1% full-scale
View Virtual Catalog - English - gy44-0379.pdf
Data Sheet
Overview
  • Ryton® PPS materials for use in aggressive and non-aggressive gas or liquid systems
  • A range of available configurations to suit most applications
  • Voltage output to monitor and record flow rates and totals
  • Interface with data acquisition system

These sensors are ideal for low-flow applications involving mildly acidic or slightly corrosive gases and liquids. Economically designed, sensors provide a single 0 to 5 VDC output signal. This single signal is ideal for simple, low-cost flow rate measurement or for integration of the sensor into an existing central control system.

Ryton PPS sensors are ideal for liquids or air. Sensors for liquids can be used with a wide variety of transparent, low-viscosity liquids under 10 cSt. Sensors measure a wide flow range from as low as 20 mL/min to as high as 500 L/min.

The wetted materials are epoxy, glass-filled polyphenylene sulfide (Ryton PPS), glass, stainless steel, sapphire, and Viton.

Note: A power supply is required for these flow sensors—order separately. If using an existing power supply, order cable assembly 32704-52.

Over 40,000 Customers Trust John Morris