- Typical application: measurement of penetration (Shore)
- Particularly recommended for internal comparison measurement. Standard calibrations e. g. to DIN 53505 are often not possible because of very narrow standard tolerances
- Shore A rubber, elastomers, neoprene, silicone, vinyl, soft plastics, felt, leather and similar material
- Shore D plastics, formica, epoxides, plexiglass etc.
- Shore A0: foam, sponge etc.
- Max mode: Holds the maximum value in the display
- Point mode: Shows one instant value
- Can be attached to the test stands SAUTER TI-A0 (for Shore A and A0), TI-D. (for Shore D)
- Delivered in a wooden carrying case
Representative image only
Analogue Shore hardness tester HB Compact handheld durometer with drag indicator; Hardness type Shore A0; Measuring range 100 HA0 Max.
$352.00
Dimensions packaging (WxDxH)180 mm x 120 mm x 50 mm
Environment max. temperature40 °C
Environment min. temperature0 °C
Gross Weight480 g
Net Weight160 g
Weighing unitsShore C
Overview
- Typical application: measurement of penetration (Shore)
- Particularly recommended for internal comparison measurement. Standard calibrations e. g. to DIN 53505 are often not possible because of very narrow standard tolerances
- Shore A rubber, elastomers, neoprene, silicone, vinyl, soft plastics, felt, leather and similar material
- Shore D plastics, formica, epoxides, plexiglass etc.
- Shore A0: foam, sponge etc.
- Max mode: Holds the maximum value in the display
- Point mode: Shows one instant value
- Can be attached to the test stands SAUTER TI-A0 (for Shore A and A0), TI-D. (for Shore D)
- Delivered in a wooden carrying case