N115B Viscosity Standard 5 Gallon_1164516
N115B Viscosity Standard 5 Gallon_1164516
N115B Viscosity Standard 5 Gallon_1164516
N115B Viscosity Standard 5 Gallon_1164516
N115B Viscosity Standard 5 Gallon_1164516
Representative image only

N115B Viscosity Standard 5 Gallon

$5,696.90

The price is inclusive of GST
CAN/MEX MSDS
EU MSDS
US MSDS
Overview

ASTM D2983, ASTM 3829, ASTM 4684, ASTM 5293, ASTM D6821, ASTM D6896, SAE J300

CANNON low temperature viscosity standards verify viscometer performance at sub-zero temperatures. These standards are applicable to SAE Specification J300 as well as a variety of ASTM methods including ASTM D2983, Low-Temperature Viscosity of Lubricants Measured by Brookfield Viscometer, ASTM D3829, Predicting the Borderline Pumping Temperature of Engine Oil, ASTM D4684, Determination of Yield Stress and Apparent Viscosity of Engine Oils at Low Temperature, ASTM D6821, Low Temperature Viscosity of Drive Line Lubricants in a Constant Shear Stress Viscometer, ASTM D6896, Determination of Yield Stress and Apparent Viscosity of Used Engine Oils at Low Temperature and ASTM D5293, Apparent Viscosity of Engine Oils and Base Stocks Between –5 °C and –35 °C Using Cold-Cranking Simulator.

Standard Size: 5 gal

Viscosity Standard: N115B

Genereal Low Temp Standards

Our general low temperature viscosity standards are applicable to a variety of tests including low temperature viscosity testing of gear oils (SAE 70W, 75W, 80W, and 85W) and automatic transmission fluids (ATF) per ASTM 2983 and SAE J300 with CANNON’s Thermoelectric Sample Conditioner System (TESC). Lot specific viscosity data is provided with each standard.

Nominal viscosity values of general low temperature viscosity standards

Catalog Number Viscosity Standard Approximate viscosity in mm2/s (cSt) & [mPa·s (cP)] except where noted
−55 °C
−67 °F
−40 °C
−40 °F
−34 °C
−30 °F
−29 °C
−20 °F
−26 °C
−15 °F
−25 °C
−13 °F
−23 °C
−10 °F
−20 °C
−4 °F
−18 °C
0 °F
−12 °C
10 °F
−10 °C
14 °F
−7 °C
20 °F
0 °C
32 °F
9727-G10 N27B* 24000
[20000]
12000
[10000]
6100
[5200]
4500
[4000]
3500
[3000]
2000
[1700]
9727-G12 N27C* 45000
[40000]
22000
[20000]
12000
[10000]
8000
[7000]
6100
[5000]
3500
[3000]
9727-G15 N115B* 160000
[140000]
110000
[95000]
75000
[65000]
37000
[30000]
20000
[17000]
12000
[9500]
9727-G25 N60B* [150000]
9727-G30 N120B* [150000]
9727-G35 N480B* [150000]
9727-G40 N1400B* [150000]
9727-G45 N2B 8 cSt
jet fuel standard
9727-G50 N74B [3400]
9727-G55 N38B* [4200]
9727-G60 N25B* [8000]
9727-G65 N14B* [17000]

* Density values provided at all test temperatures for indicated standard

CCS Standards

Low temperature viscosity "CL" standards are used for measuring dynamic viscosity in mPa·s (cP) at temperature from −5 °C to −40 °C. They are used to calibrate the CANNON Cold-Cranking Simulator (CCS) for engine oil testing per ASTM D5293, Apparent Viscosity of Engine Oils and Base Stocks Between −5 °C and −35 °C Using Cold-Cranking Simulator and SAE specification J300. Lot specific viscosity data in mPa·s (cP) is provided with each standard.

Nominal viscosity values in mPa·s (cP) of low temperature viscosity CCS standards for ASTM D5293 and SAE specification J300

Catalog Number Viscosity Standard −40 °C −35 °C −30 °C −25 °C −20 °C −18 °C −15 °C −10 °C −5 °C
9727-N02 CL080 1430 850
9727-N04 CL090 1930 1150
9727-N06 CL100
[CL10]
2450 1450 875
9727-N07 CL110 2880 1680 1030
9727-N08 CL120
[CL12]
3580 2050 1230 775
9727-N09 CL130 4580 2600 1550 975
9727-N10 CL140
[CL14]
6380 3550 2080 1300 775 675
9727-N11 CL150 7830 4310 2500 1530 950
9727-N12 CL160 10300 5580 3200 1900 1200 1000
9727-N13 CL170 12000 6430 3650 2180 1330 850
9727-N14 CL190
[CL19]
15900 8380 4680 2750 1680 1400 1080
9727-N16 CL200 21100 10900 6030 3500 2130 1330 875
9727-N18 CL220
[CL22]
—  13600 7380 4230 2550 2050 1600 1030 — 
9727-N20 CL240 —  16900 9100 5180 3050 —  1900 1230 — 
9727-N22 CL250
[CL25]
—  20000 10700 6000 3500 2880 2180 1380 — 
9727-N24 CL260 —  —  13100 7300 4300 —  2650 1680 — 
9727-N26 CL280
[CL28]
—  —  16500 9080 5280 4300 3200 2030 — 
9727-N28 CL300 —  —  20700 11300 6480 —  3880 2430 — 
9727-N30 CL320
[CL32]
—  —   — 14300 8150 6600 4850 3000 — 
9727-N31 CL340 —  —   — 17000 9580 —  5650 3480 — 
9727-N32 CL380
[CL38]
—  —   — 20800 11600 9330 6800 4180 2650
9727-N33 CL420 —  —   — —  14000 —  8180 4950 — 
9727-N34 CL480
[CL48]
—  —   — —  17400 13700 10100 6000 3780
9727-N35 CL530 —  —   — —  22000 —  12500 7500 — 
9727-N36 CL600
[CL60]
—  —   — —  —  20300 15700 9300 5700
9727-N37 CL680 —  —   — —  —  —  19400 11300 — 
9727-N38 CL740
[CL74]
—  —   — —  —  —  —  12600 7650
9727-N43 Set of 18 Set of CCS-2050/2100 low temp standards (includes CL080, CL090, CL100, CL110, CL120, CL130, CL140, CL150, CL160, CL190, CL220, CL250(2), CL280, CL320, CL380, CL480 and CL600)

CMRV Standards

The low temperature viscosity  standards are designed for use with the CANNON Mini-Rotary Viscometer (CMRV) for:

  • ASTM D3829, Predicting the Borderline Pumping Temperature of Engine Oil,
  • ASTM D4684, Determination of Yield Stress and Apparent Viscosity of Engine Oils at Low Temperature,
  • ASTM D6821, Low Temperature Viscosity of Drive Line Lubricants in a Constant Shear Stress Viscometer,
  • ASTM D6896, Determination of Yield Stress and Apparent Viscosity of Used Engine Oils at Low Temperature, and
  • SAE Specification J300

Lot specific viscosity data is provided with each standard.

Nominal viscosity values of low temperature CMRV viscosity  standards for ASTM D3829, ASTM D4684, ASTM D6821, ASTM D6898 and SAE specification J300

Catalog Number Viscosity Standard† Approximate Viscosity
9727-T10 N105B* 30000 mPa·S (cP) at −20 °C CMRV viscosity standard
56200 mPa·S (cP) at −25 °C CMRV viscosity standard
9727-T20 YS-30 Exhibits yield stress of 70 Pa ±35 Pa at −30 °C
9727-T25 YS-35 Exhibits yield stress of 70 Pa ±35 Pa at −35 °C

 * Density values provided at all test temperatures for indicated standard

Over 40,000 Customers Trust John Morris