FLOW SENSOR PP 0.2-20GPM_1149753
Representative image only

FLOW SENSOR PP 0.2-20GPM

Accuracy±1% full-scale
DescriptionLow-Flow Impeller Sensor, PP, 0.2 to 20 GPM
Fluid TypeHigh Purity, High Viscocity
Material ValvePP
Max flow rate (GPM)20
Max Operating Temperature (DegreeC)71
Max Operating Temperature (DegreeF)160
Min flow rate (GPH)0.2
Output6 to 24 VDC pulse
Output (Voltage)Yes
Pressure drop at maximum flow (PSID)24
Repeatability±0.5% full-scale
View Virtual Catalog - English - gy44-0386.pdf
Overview
  • Impeller design minimizes wear for long sensor life

Each flow sensor uses a rotating turbine and a magnetic Hall-effect sensor to generate an electronic pulse proportional to flow rate. The controller converts these pulses into flow units. These low-flow sensors measure flow rates in pipe sizes from 3/8 to 1" NPT(F). Sensors generate a square wave pulse output that can be sent to flow controllers 33110-60 or -70 to display flow rate and total, batch controller 33112-52 which provides batch output control to multiple devices, or rate/total display 33112-50, which is a battery operated two-line display.


Choose from polypropylene (PP), PTFE, 316 stainless steel(SS), or brass sensors. Select PP sensors for general-purpose applications. Use PTFE sensors for high-purity, high-temperature applications. The 316 SS sensors should be

Over 40,000 Customers Trust John Morris