Setastill Distillation (Left Mount)_1111977
Setastill Distillation (Left Mount)_1111977
Setastill Distillation (Left Mount)_1111977
Representative image only

Setastill Distillation (Left Mount)

Condenser Tank Volume7.2 litre
Distillation RangeAmbient to 400°C
Power1000W maximum
Size (HxWxD)47 x 37 x 25cm (Condenser) 47 x 21 x 21cm (Draught Screen)
Voltage range110/120V or 220/240V, 50/60Hz (switchable)
Weight12 kg total
11860-3_setastill
Overview

The D86 atmospheric distillation unit, mounted to the left, comprises a flask support mechanism, heater elements, and the heater controller. The flask is supported by a drop-in ceramic-glass support board mounted to a platform that is adjustable for height.

  • Ambient to 400°C distillation range
  • Adjustable height heater/flask platform
  • Toughened glass window
  • Cooling fan

The quartz enclosed heating elements are also attached to the platform, and are powered by a solid-state energy regulator and calibrated control. A cooling fan is installed in the rear of the distillation unit to reduce cooling time between distillations. A toughened glass observation window is fitted in the front of the distillation window, and a spillage collection tray with outlet is mounted beneath the heaters.

The condenser unit is attached to the distillation unit, and may be used with either a static fill of coolant or a laboratory cooling supply. Housed within the condenser unit is a thermally-insulated, stainless steel coolant tank, fitted with a permanently installed condenser tube. A drain tap and an overflow outlet are mounted on the rear of the unit.

Supplied with: mains lead and instruction manual.

 

 

Over 40,000 Customers Trust John Morris