Temperature
Setting temperature range
-12 to +60 °C
Working-temperature range
from -12°C up to +60°C (Optimum performance of cooling aggregate at an ambient temperature of +16°C up to +34°C. Not suitable for long-term storing at sub-zero temperatures. During permanent operation, the glass door may ice over.)
Setting accuracy temperature
0.1 °C
Temperature sensor
2 Pt100 sensors DIN Class A in 4-wire-circuit for mutual monitoring, taking over functions in case of an error
Control technology
ControlCOCKPIT
TwinDISPLAY. Adaptive multifunctional digital PID-microprocessor controller with 2 high-definition TFT-colour displays.
Language setting
German, English, Spanish, French, Polish, Czech, Hungarian
Timer
Digital backwards counter with target time setting, adjustable from 1 minute to 99 days
Function SetpointWAIT
the process time does not start until the set temperature is reached
Calibration
three freely selectable temperature values
adjustable parameters
temperature (Celsius or Fahrenheit), fan speed, programme time, time zones, summertime/wintertime
Communication
Documentation
programme stored in case of power failure
Programming
AtmoCONTROL software on a USB stick for programming, managing and transferring programmes via Ethernet interface or USB port
Safety
Temperature control
mechanical temperature limiter TB, protection class 1 according to DIN 12880 to switch off the heating approx. 10°C above nominal temperature
Temperature control
over- and undertemperature monitor TWW, protection class 3.3 or adjustable temperature limiter TWB, protection class 2, selectable on display
AutoSAFETY
additionally integrated over- and undertemperature protection "ASF", automatically following the setpoint value at a preset tolerance range, alarm in case of over- or undertemperature, heating is switched off in case of overtemperature, compressor in case of undertemperature
Autodiagnostic system
for fault analysis
Alarm
visual and acoustic
Heating concept
Cooling
Cooling compressor with climate-friendly refrigerant CO2 (R744), GWP1
Air jacket
air jacket heating system for gentle all-around heating
Heating concept
no drying-up of the load caused by the cooling device due to separation of thermal jacket from interior
Defrosting
highly efficient automatic defrosting system
Standard equipment
Internals
2 stainless steel grid(s), electropolished
Works calibration certificate
for +10°C and +37°C
Door
inner glass doors
Door
fully insulated stainless steel doors with 2-point locking (compression door lock)
Stainless steel interior
Dimensions
w(A) x h(B) x d(C): 1040 x 720 x 600 mm (d less 33 mm for fan)
Volume
449 l
Max. number of internals
8
Max. loading of chamber
200 kg
Max. loading per internal
30 kg
Textured stainless steel casing
Dimensions
w(D) x h(E) x d(F): 1224 x 1467 x 784 mm (d +56mm door handle)
Installation
on lockable castors
Housing
rear zinc-plated steel
Electrical data
Voltage Electrical load
230 V, 50 Hz
approx. 1200 W
Ambient conditions
Set Up
The distance between the wall and the rear of the appliance must be at least 15 cm. The clearance from the ceiling must not be less than 20 cm and the side clearance from walls or nearby appliances must not be less than 5 cm.
Ambient temperature
15 °C to 28 °C (up to 34 °C with limited temperature range)
Humidity rh
max. 70 %, non-condensing
Altitude of installation
max. 2,000 m above sea level
Overvoltage category
II
Pollution degree
2
Temperature
Setting temperature range
-12 to +60 °C
Working-temperature range
from -12°C up to +60°C (Optimum performance of cooling aggregate at an ambient temperature of +16°C up to +34°C. Not suitable for long-term storing at sub-zero temperatures. During permanent operation, the glass door may ice over.)
Setting accuracy temperature
0.1 °C
Temperature sensor
2 Pt100 sensors DIN Class A in 4-wire-circuit for mutual monitoring, taking over functions in case of an error
Control technology
ControlCOCKPIT
TwinDISPLAY. Adaptive multifunctional digital PID-microprocessor controller with 2 high-definition TFT-colour displays.
Language setting
German, English, Spanish, French, Polish, Czech, Hungarian
Timer
Digital backwards counter with target time setting, adjustable from 1 minute to 99 days
Function SetpointWAIT
the process time does not start until the set temperature is reached
Calibration
three freely selectable temperature values
adjustable parameters
temperature (Celsius or Fahrenheit), fan speed, programme time, time zones, summertime/wintertime
Communication
Documentation
programme stored in case of power failure
Programming
AtmoCONTROL software on a USB stick for programming, managing and transferring programmes via Ethernet interface or USB port
Safety
Temperature control
mechanical temperature limiter TB, protection class 1 according to DIN 12880 to switch off the heating approx. 10°C above nominal temperature
Temperature control
over- and undertemperature monitor TWW, protection class 3.3 or adjustable temperature limiter TWB, protection class 2, selectable on display
AutoSAFETY
additionally integrated over- and undertemperature protection "ASF", automatically following the setpoint value at a preset tolerance range, alarm in case of over- or undertemperature, heating is switched off in case of overtemperature, compressor in case of undertemperature
Autodiagnostic system
for fault analysis
Alarm
visual and acoustic
Heating concept
Cooling
Cooling compressor with climate-friendly refrigerant CO2 (R744), GWP1
Air jacket
air jacket heating system for gentle all-around heating
Heating concept
no drying-up of the load caused by the cooling device due to separation of thermal jacket from interior
Defrosting
highly efficient automatic defrosting system
Standard equipment
Internals
2 stainless steel grid(s), electropolished
Works calibration certificate
for +10°C and +37°C
Door
inner glass doors
Door
fully insulated stainless steel doors with 2-point locking (compression door lock)
Stainless steel interior
Dimensions
w(A) x h(B) x d(C): 1040 x 720 x 600 mm (d less 33 mm for fan)
Volume
449 l
Max. number of internals
8
Max. loading of chamber
200 kg
Max. loading per internal
30 kg
Textured stainless steel casing
Dimensions
w(D) x h(E) x d(F): 1224 x 1467 x 784 mm (d +56mm door handle)
Installation
on lockable castors
Housing
rear zinc-plated steel
Electrical data
Voltage Electrical load
230 V, 50 Hz
approx. 1200 W
Ambient conditions
Set Up
The distance between the wall and the rear of the appliance must be at least 15 cm. The clearance from the ceiling must not be less than 20 cm and the side clearance from walls or nearby appliances must not be less than 5 cm.
Ambient temperature
15 °C to 28 °C (up to 34 °C with limited temperature range)
Humidity rh
max. 70 %, non-condensing
Altitude of installation
max. 2,000 m above sea level
Overvoltage category
II
Pollution degree
2
