Model:422E38 - In-line charge converter, 0.1 mV/pC, +/-2.5V output, -5% frequency 5 Hz, for high temp sensors_1145340
Representative image only

Model:422E38 - In-line charge converter, 0.1 mV/pC, +/-2.5V output, -5% frequency 5 Hz, for high temp sensors

$1,250.70

The price is inclusive of GST
In-Line Charge Converter
In-line charge converter, 0.1 mV/pC, +/-2.5V output, -5% frequency 5 Hz, for high temp sensors


Product Specifications
 ENGLISHSI 
Performance
    Sensitivity (±2 %) (Charge Conversion)0.1 mV/pC0.1 mV/pC 
    Input Range±25000 pC±25000 pC 
    Low Frequency Response (-5 %)5 Hz5 Hz[2] 
    High Frequency Response (2.2 mA)4 kHz4 kHz[1] 
    High Frequency Response (4 mA)15 kHz15 kHz[1] 
    High Frequency Response (20 mA)100 kHz100 kHz[1] 
    Non-Linearity≤1.0 % FS≤1.0 % FS 
Environmental
    Temperature Range (Operating)-65 to +250 °F-54 to +121 °C 
    Temperature Response (Sensitivity Deviation)<2><2> 
    Maximum Shock1000 g pk9810 m/s² pk 
    Humidity Range100 %100 % 
Electrical
    Excitation Voltage+18 to 28 VDC+18 to 28 VDC 
    Constant Current Excitation2.2 to 20 mA2.2 to 20 mA 
    Settling Time<6><6> 
    Output Voltage (at specified measurement range)±2.5 V±2.5 V 
    Output PolarityInvertedInverted 
    Output Impedance<10><10> 
    Output Bias Voltage+12.00 to 15.00 VDC+12.00 to 15.00 VDC 
    Maximum Input Voltage30 V30 V 
    Broadband Electrical Noise (1 to 10000 Hz)14.0 µV-97 dB[3] 
    Spectral Noise (1 Hz)8.90 µV/√Hz-101 dB[3] 
    Spectral Noise (10 Hz)0.85 µV/√Hz-121 dB[3] 
    Spectral Noise (100 Hz)0.31 µV/√Hz-130 dB[3] 
    Spectral Noise (1 kHz)0.17 µV/√Hz-135 dB[3] 
    Spectral Noise (10 kHz)0.07 µV/√Hz-143 dB[3] 
    Capacitance (Maximum allowable at input)20000 pF20000 pF 
    Resistance (Minimum required at input)10000 Ohm10000 Ohm 
    Source Capacitance Loading<0.0005><0.0005> 
Physical
    Housing MaterialStainless SteelStainless Steel 
    SealingWeldedWelded 
    Electrical Connector (Input)10-32 Coaxial Jack10-32 Coaxial Jack 
    Electrical Connector (Output)BNC JackBNC Jack 
    Size - Diameter0.52 in13 mm 
    Size - Length3.4 in86 mm 
    Weight1.1 oz31 gm 

All specifications are at room temperature unless otherwise specified.

CE
Product Notes
[1] Above stated frequency, the amplifier becomes slew rate limited.
[2] The low frequency tolerance is accurate within ±10% of the specified frequency.
[3] Tested using voltage source and input capacitor equal to the feedback capacitor, to simulate a charge output sensor.
[4] See PCB Declaration of Conformance PS024 for details. A low impendance connection from case to earth ground is required to maintain CE compliance.
Accessories:
No Accessories
Optional Versions:
(T) TEDS Capable of Digital Memory and Communication Compliant with IEEE P1451.4
 ENGLISHSI
    Temperature Range-40 to +185 -40 to +85

Over 40,000 Customers Trust John Morris