ASTM D2983, ASTM 3829, ASTM 4684, ASTM 5293, ASTM D6821, ASTM D6896, SAE J300
CANNON low temperature viscosity standards verify viscometer performance at sub-zero temperatures. These standards are applicable to SAE Specification J300 as well as a variety of ASTM methods including ASTM D2983, Low-Temperature Viscosity of Lubricants Measured by Brookfield Viscometer, ASTM D3829, Predicting the Borderline Pumping Temperature of Engine Oil, ASTM D4684, Determination of Yield Stress and Apparent Viscosity of Engine Oils at Low Temperature, ASTM D6821, Low Temperature Viscosity of Drive Line Lubricants in a Constant Shear Stress Viscometer, ASTM D6896, Determination of Yield Stress and Apparent Viscosity of Used Engine Oils at Low Temperature and ASTM D5293, Apparent Viscosity of Engine Oils and Base Stocks Between –5 °C and –35 °C Using Cold-Cranking Simulator.
Standard Size: 1 L / 32 oz
Viscosity Standard: N60B
Genereal Low Temp Standards
Our general low temperature viscosity standards are applicable to a variety of tests including low temperature viscosity testing of gear oils (SAE 70W, 75W, 80W, and 85W) and automatic transmission fluids (ATF) per ASTM 2983 and SAE J300 with CANNON’s Thermoelectric Sample Conditioner System (TESC). Lot specific viscosity data is provided with each standard.
Nominal viscosity values of general low temperature viscosity standards
| Catalog Number | Viscosity Standard | Approximate viscosity in mm2/s (cSt) & [mPa·s (cP)] except where noted | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| −55 °C −67 °F |
−40 °C −40 °F |
−34 °C −30 °F |
−29 °C −20 °F |
−26 °C −15 °F |
−25 °C −13 °F |
−23 °C −10 °F |
−20 °C −4 °F |
−18 °C 0 °F |
−12 °C 10 °F |
−10 °C 14 °F |
−7 °C 20 °F |
0 °C 32 °F |
||
| 9727-G10 | N27B* | — | 24000 [20000] |
12000 [10000] |
6100 [5200] |
4500 [4000] |
— | 3500 [3000] |
— | 2000 [1700] |
— | — | — | — |
| 9727-G12 | N27C* | — | 45000 [40000] |
22000 [20000] |
12000 [10000] |
8000 [7000] |
— | 6100 [5000] |
— | 3500 [3000] |
— | — | — | — |
| 9727-G15 | N115B* | — | — | — | 160000 [140000] |
110000 [95000] |
— | 75000 [65000] |
— | 37000 [30000] |
20000 [17000] |
— | 12000 [9500] |
— |
| 9727-G25 | N60B* | [150000] | — | — | — | — | — | — | — | — | — | — | — | — |
| 9727-G30 | N120B* | — | [150000] | — | — | — | — | — | — | — | — | — | — | — |
| 9727-G35 | N480B* | — | — | — | — | [150000] | — | — | — | — | — | — | — | — |
| 9727-G40 | N1400B* | — | — | — | — | — | — | — | — | — | [150000] | — | — | — |
| 9727-G45 | N2B | — | — | — | — | — | — | — | 8 cSt jet fuel standard |
— | — | — | — | — |
| 9727-G50 | N74B | — | — | — | — | — | — | — | — | — | — | — | — | [3400] |
| 9727-G55 | N38B* | — | — | — | — | — | — | — | — | — | — | [4200] | — | — |
| 9727-G60 | N25B* | — | — | — | — | — | [8000] | — | — | — | — | — | — | — |
| 9727-G65 | N14B* | — | [17000] | — | — | — | — | — | — | — | — | — | — | — |
* Density values provided at all test temperatures for indicated standard
CCS Standards
Low temperature viscosity "CL" standards are used for measuring dynamic viscosity in mPa·s (cP) at temperature from −5 °C to −40 °C. They are used to calibrate the CANNON Cold-Cranking Simulator (CCS) for engine oil testing per ASTM D5293, Apparent Viscosity of Engine Oils and Base Stocks Between −5 °C and −35 °C Using Cold-Cranking Simulator and SAE specification J300. Lot specific viscosity data in mPa·s (cP) is provided with each standard.
Nominal viscosity values in mPa·s (cP) of low temperature viscosity CCS standards for ASTM D5293 and SAE specification J300
| Catalog Number | Viscosity Standard | −40 °C | −35 °C | −30 °C | −25 °C | −20 °C | −18 °C | −15 °C | −10 °C | −5 °C |
|---|---|---|---|---|---|---|---|---|---|---|
| 9727-N02 | CL080 | 1430 | 850 | — | — | — | — | — | — | — |
| 9727-N04 | CL090 | 1930 | 1150 | — | — | — | — | — | — | — |
| 9727-N06 | CL100 [CL10] |
2450 | 1450 | 875 | — | — | — | — | — | — |
| 9727-N07 | CL110 | 2880 | 1680 | 1030 | — | — | — | — | — | — |
| 9727-N08 | CL120 [CL12] |
3580 | 2050 | 1230 | 775 | — | — | — | — | — |
| 9727-N09 | CL130 | 4580 | 2600 | 1550 | 975 | — | — | — | — | — |
| 9727-N10 | CL140 [CL14] |
6380 | 3550 | 2080 | 1300 | 775 | 675 | — | — | — |
| 9727-N11 | CL150 | 7830 | 4310 | 2500 | 1530 | 950 | — | — | — | — |
| 9727-N12 | CL160 | 10300 | 5580 | 3200 | 1900 | 1200 | 1000 | — | — | — |
| 9727-N13 | CL170 | 12000 | 6430 | 3650 | 2180 | 1330 | — | 850 | — | — |
| 9727-N14 | CL190 [CL19] |
15900 | 8380 | 4680 | 2750 | 1680 | 1400 | 1080 | — | — |
| 9727-N16 | CL200 | 21100 | 10900 | 6030 | 3500 | 2130 | — | 1330 | 875 | — |
| 9727-N18 | CL220 [CL22] |
— | 13600 | 7380 | 4230 | 2550 | 2050 | 1600 | 1030 | — |
| 9727-N20 | CL240 | — | 16900 | 9100 | 5180 | 3050 | — | 1900 | 1230 | — |
| 9727-N22 | CL250 [CL25] |
— | 20000 | 10700 | 6000 | 3500 | 2880 | 2180 | 1380 | — |
| 9727-N24 | CL260 | — | — | 13100 | 7300 | 4300 | — | 2650 | 1680 | — |
| 9727-N26 | CL280 [CL28] |
— | — | 16500 | 9080 | 5280 | 4300 | 3200 | 2030 | — |
| 9727-N28 | CL300 | — | — | 20700 | 11300 | 6480 | — | 3880 | 2430 | — |
| 9727-N30 | CL320 [CL32] |
— | — | — | 14300 | 8150 | 6600 | 4850 | 3000 | — |
| 9727-N31 | CL340 | — | — | — | 17000 | 9580 | — | 5650 | 3480 | — |
| 9727-N32 | CL380 [CL38] |
— | — | — | 20800 | 11600 | 9330 | 6800 | 4180 | 2650 |
| 9727-N33 | CL420 | — | — | — | — | 14000 | — | 8180 | 4950 | — |
| 9727-N34 | CL480 [CL48] |
— | — | — | — | 17400 | 13700 | 10100 | 6000 | 3780 |
| 9727-N35 | CL530 | — | — | — | — | 22000 | — | 12500 | 7500 | — |
| 9727-N36 | CL600 [CL60] |
— | — | — | — | — | 20300 | 15700 | 9300 | 5700 |
| 9727-N37 | CL680 | — | — | — | — | — | — | 19400 | 11300 | — |
| 9727-N38 | CL740 [CL74] |
— | — | — | — | — | — | — | 12600 | 7650 |
| 9727-N43 | Set of 18 | Set of CCS-2050/2100 low temp standards (includes CL080, CL090, CL100, CL110, CL120, CL130, CL140, CL150, CL160, CL190, CL220, CL250(2), CL280, CL320, CL380, CL480 and CL600) | ||||||||
CMRV Standards
The low temperature viscosity standards are designed for use with the CANNON Mini-Rotary Viscometer (CMRV) for:
- ASTM D3829, Predicting the Borderline Pumping Temperature of Engine Oil,
- ASTM D4684, Determination of Yield Stress and Apparent Viscosity of Engine Oils at Low Temperature,
- ASTM D6821, Low Temperature Viscosity of Drive Line Lubricants in a Constant Shear Stress Viscometer,
- ASTM D6896, Determination of Yield Stress and Apparent Viscosity of Used Engine Oils at Low Temperature, and
- SAE Specification J300
Lot specific viscosity data is provided with each standard.
Nominal viscosity values of low temperature CMRV viscosity standards for ASTM D3829, ASTM D4684, ASTM D6821, ASTM D6898 and SAE specification J300
| Catalog Number | Viscosity Standard† | Approximate Viscosity |
|---|---|---|
| 9727-T10 | N105B* | 30000 mPa·S (cP) at −20 °C CMRV viscosity standard 56200 mPa·S (cP) at −25 °C CMRV viscosity standard |
| 9727-T20 | YS-30 | Exhibits yield stress of 70 Pa ±35 Pa at −30 °C |
| 9727-T25 | YS-35 | Exhibits yield stress of 70 Pa ±35 Pa at −35 °C |
* Density values provided at all test temperatures for indicated standard
